Add Song Instructions

===============================================================

HOW TO ADD SONG(S) FROM DVDs:

Step 1.

1. Entering the K-Pod system by pressing the “System” button on the remote and enter code.

2. Select “Basic Setting”

3. Select “Remote” option and use the up/down arrows to select “VGA OFF”.

4. Exit the K-Pod by pressing the “Return” button on the remote.

Step. 2

1. Press the “KOD/DVD” button on the remote and load a “Un-Protected DVDs.

2. Play the song to upload to K-Pod HDD.

3. Press the “Record” button on the remote

4. The K-Pod will prompt to confirm your selection.

If yes, press the “Record” button again. This process will take approximately 2-5 minutes.

5. Please look at the percentage meter to the right of your TV, during this process please wait until the “Highlighted” yellow appears at the “No.” area and when it appears, you may start to input the song data(see Cambodian Songbook Vol.2 for song codes)

Examples:

No. (See Cambodian Songbook Vol.2 for codes)

Tone: Male/Female(use the “Green Arrows” to select)

Name: Artist’s Name(use “Entry” button to switch from numeric to alphabet letter)

Language: Select the proper Language of the Song by using the “Green Arrows”

Song: Song Title(use “Entry” button to switch from numeric to alphabet letter)

Area: use More Male/More Female/Group by using the “Green Arrows”

Word: Option, H.D.: Do Not Use, Type: Option

6. After all inputs, the K-Pod is uploading the song and this process takes approximately 10-12 minutes per song(each song may varies). When the song finished uploading, the meter should read “100%” and with the message “Copy End, Wait…”

7. After the song finished uploading, the K-Pod will prompt to add the “Singer” to the HDD, please select “YES”.

8. Recall the uploaded song by entering the code inputted.

9. Repeat 1-9 to upload additional songs.

===========================================================

HOW TO ADD(S) FROM VCDs:

Step 1.

1. Entering the K-Pod system by pressing the “System” button on the remote and enter code.

2. Select “Basic Setting”

3. Select “Remote” option and use the up/down arrows to select “VGA OFF”.

4. Exit the K-Pod by pressing the “Return” button on the remote.

Step. 2

1. Load VCD disc by pressing “KOD/DVD” button and load VCD disc

2. Switch back to “K-Pod” by pressing “KOD/DVD” button on the remote

3. Entering the K-Pod system by pressing the “System” button on the remote and enter code.

4. Select “Add/Del Song” and select “VCD Disc Add” (this process takes 1 – 2 minutes)

5. Use Page Up or Page Down buttons on the remote to select the song to upload to K-Pod HDD. Multiple songs may be uploaded.

6. Input song’s data(e.g. song code(see Cambodian songbook Vol.2), artist name, song title, song gender, song language, etc…)

Examples:

No. (See Cambodian Songbook Vol.2 for codes)

Name: Artist’s Name(use “Entry” button to switch from numeric to alphabet letter)

Song: Song’s Title(use “Entry” button to switch from numeric to alphabet letter)

Area: More Male/More Female(use the “Green Arrows” to select)

Language: use the “Green Arrows” to select proper language of the song

Tone: Male/Female/Group(use “Green Arrows” to select

Word: Option, H.D. Do Not Use, Type: Do Not Use



Note: Press the “Play/Pause” button to start recording. Do not use the “Record” button on the remote.



7. After all inputs, the K-Pod is uploading the song and this process takes approximately 8-10 minutes per song.

8. After the song finished uploading, the K-Pod will prompt to add the “Singer” to the HDD, please select “YES”.

9. Exit the K-Pod by pressing the “Return” button on the remote.

10. Recall the uploaded song(s) by entering the code inputted.

11. Repeat 1-9 to upload additional songs.